Linksys Velop Purple Light
The Linksys Velop is well known for its dependability and efficiency in the field of home networking. But just like any technology, there might occasionally be problems. One frequent worry among users is the appearance of a purple light on their Velop device. If you're experiencing this confusing purple glow, don't worry; in this guide, we'll explore the potential reasons behind the Linksys Velop purple light and offer workable fixes to fix the problem.
Linksys Velop Purple Light
It's critical to comprehend the meaning of the purple light on your Linksys Velop device before beginning any troubleshooting. When everything is working properly, a Velop node's LED indicator will usually show solid blue. But if the LED becomes purple, that means there's a problem that needs to be fixed with the node.
Step-by-Step Solutions for the Linksys Velop Purple Light issue
Don't panic if your Linksys Velop device is showing the dreaded purple light! We've provided step-by-step instructions below to help you fix this problem and resume normal operation of your home network.
Check Connectivity:
Make sure that every cable connecting to your Velop node is plugged in firmly.
Check that power is getting to the node from the adapter.
Take a look around to see if anything is blocking the Wi-Fi signal.
Verify if the node is situated close to your router or other mesh network nodes.
Restart the Velop Node:
Take the Velop node power plug out.
Hold off for roughly thirty seconds.
Reconnect the node's plug and let it restart.
Check to see if the purple light remains after restarting.
Check for Firmware Updates:
Use the web interface or the Linksys app to get started.
Examine your Velop node for any firmware updates that are still due.
To download and install any available updates, follow the directions.
Once the update is finished, see if the purple light has vanished.
Perform a Reset:
On your Velop node, look for the reset button (usually a small hole).
Hold down the reset button for approximately ten seconds by inserting a paperclip or other comparable instrument.
After releasing the reset button, watch for the node to restart.
Once the reset is finished, use the Linksys app or web interface to reconfigure the node.
Contact Linksys Support:
You may have a hardware problem if the purple light remains after you've tried the above fixes.
For further assistance, get in touch with Linksys customer support.
Provide a thorough description of the troubleshooting steps you have previously taken.
Support from Linksys can offer more advice or set up a replacement if needed.